What is the difference between Bondo and Bondo wood filler?
The biggest advantage of using Bondo over a regular wood filler is the short dry time. Wood filler can take hours to dry and require more than one coat. Bondo dries in less than 30 minutes and only requires one coat! This means more projects in less time.
Is there a substitute for Bondo?
You can use plastic/metal 2-part epoxies. Repair epoxy is also a good alternative.
Is Bondo a good body filler?
Bondo Body Filler cures fast, shapes in minutes and is formulated to be a non-shrinking and permanently durable material. In addition to its uses on vehicle exteriors and other metal surfaces it is also a suitable repair option for wood, fiberglass and concrete.
What’s the strongest wood filler?
Coming in as our number one pick is DAP Plastic Wood. This all-purpose, solvent-based wood filler is formulated with real wood fibers. It looks and acts like actual wood, except once it hardens, it’s three times as strong.
What is the best filler for wood?
7 Best Wood Fillers Of 2021 Reviews
- Bondo Wood Filler. First on our list is the Bondo 200082 Home Solutions Wood Filler.
- Minwax Wood Filler.
- Elmer’s Wood Filler.
- Aqua Coat Wood Grain Filler.
- DAP 00585 Latex Wood Filler.
- Famowood Wood Filler.
- GoodfIlla Wood & Grain Filler.
Do you need primer over Bondo?
You should use a “direct to metal” (DTM) primer to help top coats stick to the metal but it’s not needed under body filler most of the time. Once the metal is primed then you can apply a “filler primer” (2K) to help hide scratches and minor surface irregularities.
Can I use Bondo without hardener?
Without it the bondo won’t get hard. Put a small piece of bondo on a board and run a line of hardener from end to end. It will take about five minutes to mix it up and apply it.
Why did my Bondo crack?
You could have filler start to crack at a place where you were just smoothing out a dent and it’s not a stress crack, and it’s caused from several different things. Improper mixing of the hardener, I’ve seen it crack from people not scuffing up the paint or grinding it down to the metal.
What to use to fill large gaps in wood?
Wood putty: A putty is a good option for fixing up large gaps and holes. For one, it has natural wood! It won’t have a problem with shrinkage like other fillers, and wood putty is often oil-based. Wood putty can be used with projects for any type of environment.
How long does a Bondo filler Harden?
How long does it take for Bondo to fully cure? If your filler hardens too fast, you used too much, if it takes too long, you didn’t use enough. You only want to mix what you can use in about 10 minutes. Properly mixed, body filler will begin to thicken in 10-15 minutes, and be fully cured in 30.
Can you put Bondo over fiberglass?
The expense of replacing damaged fiberglass panels can be significantly reduced by instead repairing the panels with Bondo. Fiberglass Bondo is waterproof, extremely strong and can be used for virtually any fiberglass panel. As an initial matter, it must be recognized that there is Bondo for metal and Bondo for fiberglass.
Does Bondo body filler work on plastic?
Like most plastic body fillers, Bondo is a lightweight polyester-based plastic body filler that was originally developed as an alternative to lead body solder. The Bondo brand name was created in 1955, just a few years after the use of lead body solder began to be prohibited.