How do I connect to my Evohome?
Press and hold the menu button for a further 5 seconds until it says BIND. Press the menu button once – it should say BINDING. You should receive a SUCCESS message on the evohome controller(if not go back and re-bind). The name of the allocated zone should appear on the HR92 display when you press the menu button.
How do I connect my phone to my Honeywell thermostat?
Download the Honeywell Total Connect Comfort app. It’s available for both iOS and Android. Verify that the words “Wi-Fi SETUP” are displayed across the thermostat’s screen. If not, you’ll have to manually put the thermostat into Wi-Fi setup mode.
How does Honeywell Evohome work?
Honeywell evohome HR91 & HR92 Radiator Controllers Smart zoning works by controlling the flow of central heating water to each individual radiator and telling the boiler to only switch ‘on’ when the radiator controller actually requires it to.
How do I bind my Honeywell Evohome?
How to put the evohome controller into binding mode?
- Press and hold the “SETTINGS” icon for approximately 3 seconds.
- Press the green tick when receiving the following message.
- Press the “ADD ZONE” option located on the bottom left side of the screen.
- Type a name for the new zone and press the green tick.
How do I connect my phone to the thermostat?
To pair your mobile device (Android or iPhone) with Nest, download the Nest app. Then, connect to the same Wi-Fi network as your Nest thermostat (presumably your only home network). Then open the app and tap Sign Up for a Nest Account. Enter your e-mail address, create a username and password, then click “Sign up.”
Does Evohome work without Wi-Fi?
Answer: Evohome is supposed to work without Wifi just fine, because it uses its own radio network. Obviously, you will have to walk to the main controller to see and/or adjust the temperature. I mean without Wi-Fi you will not be able to use the smartphone app.
Does Evohome use Wi-Fi?
Evohome is controlled directly from its touchscreen controller. It’s brilliantly simple to use, giving you an overview of every zone in your home, and it connects via Wi-Fi, so you can use the Evohome app without having to install a separate hub.
What are the key features of the Evotouch Comfort Control System?
2 The Honeywell evotouch comfort control system is a programmable zoning controller with the following key features: Features • Large touch-screen display for intuitive operation by finger. • Wall or table-top mounting.
Are the evohome connected thermostats compatible with air conditioning?
Yes, evohome is suitable for heating and cooling applications. Contact your professional installer for a study of your installation and propose the most suitable solution. Are the Connected Thermostats compatible with Air Conditioning? No, our Connected Thermostats are designed to work in conjunction with Central Heating systems.
Can I use the USB port on my evohome controller?
The USB port should be used only for manually deploying the firmware on the controller, but it was discontinued with the new generation of evohome and it’s not advisable to use it for this purpose as you can damage the software. What standard TRV heads can be used to replace the HR80UK radiator controller?
How do I find the MAC address of my evohome thermostat?
Log in to your Total Connect Comfort account and select the location to which you registered your evohome thermostat. The MAC of your thermostat shall be displayed under the ‘Device Assigned to this Location’ section of the page.