How big is a Postcrete hole?
Postcrete may be used for the purposes of fixing domestic posts. The amount of Postcrete required will depend on the size of hole and post. For example: 1 bag = square post 10 cm (4”) with a hole 20 cm (8”) wide x 75 cm (30”) deep. Please refer to Product Datasheet for more details.
What is the best concrete mix for fence posts?
For a small to mid sized job I recommend going with premixed. The best concrete mix for fence posts I’ve found is Quikrete Fast Setting Concrete Mix in a 50 lb bag. It’s 4000 psi, easy to work with, sets up fast, and doesn’t need to be mixed. Just pour it in the hole and soak with water.
What is the difference between concrete and Postcrete?
Depending on its application, traditional concrete can take between 24-48 hours and 7 days to set properly and will reach its optimum strength after 25-28 days. Postcrete, on the other hand, is the name given to a post mix concrete, which is a ready to use blend of concrete ingredients that requires no mixing.
Is one bag of Postcrete enough for one post?
“Usually one bag of postcrete per post is enough, however you can use a two bags per post if you feel this is needed.
Is one bag of concrete enough for fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
Should I mix concrete for fence posts?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be 1/3 to 1/2 of the actual above-ground height of the post. Fast-setting concrete is ideal for installing fence posts since it doesn’t need to be mixed in a bucket or a wheelbarrow.
Do you have to mix concrete for posts?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
Is Postcrete any good for concrete posts?
Post Mix Concrete is a versatile, pre-mixed and fast setting concrete product, ideal for both DIY and professional use. In the garden it provides strong foundations for gate posts and fence posts without the need for measuring different materials or a cement mixer.
How deep should an 8ft fence post be?
How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
How many bags of concrete does it take to fill a post hole?
Can you mix concrete in a fence post hole?
Mixed Concrete in a Fence Post Hole. Any concrete producer will tell you that it should be mixed wet and then poured. Concrete trucks drive around with mixing wet product for a reason. Think of it this way.
How do you use fast setting concrete for fence posts?
Pour the dry mix into the tube. Two 50-pound bags of fast-setting concrete will set a 4-inch-by-4-inch (or a 4-inch diameter) post in a 10-inch diameter hole 2 feet deep. Pour water into the dry mix and allow it to soak in. Use enough water to saturate the dry mix. Fill the remainder of the hole with soil dug from the hole.
How do you use Sakrete fence post mix?
Use SAKRETE Fence Post Mix to set below-grade fence posts. This bag only requires you to mix in water before getting started. Fence Post mix is designed specifically for anchoring fence posts. You may add Fast Set Accelerator to expedite curing time. SAKRETE Fence Post mix is not recommended for any other structural applications.
Can I use fastfence post mix for other structural applications?
Fence Post mix is designed specifically for anchoring fence posts. You may add Fast Set Accelerator to expedite curing time. SAKRETE Fence Post mix is not recommended for any other structural applications.