How do you cut a Laserlite sheet?
How do I cut the Laserlite sheet? Cut with shears, a fine toothed hand saw or circular saw with a cut off blade suitable for plastics.
What is the best way to cut polycarbonate sheet?
Polycarbonate sheets can be cut with either a circular saw or a jigsaw. A circular saw is the best tool for cutting larger polycarbonate lengths. Thanks to the properties of this material, polycarbonate won’t crack or splinter around the cut.
What is the best blade to cut polycarbonate?
Polycarbonate can be cut with a variety of common hand held and table mounted sawing equipment. Fine tooth hollow ground blades and triple chip carbide blades are the best choices for producing a good quality finish. For thin gauge sheet 1/16” -3/32” thick use hollow ground panel blades with 10-12 teeth per inch.
What is the difference between Suntuf and Laserlite?
Polycarbonate Colours: Light = Heat For example, Suntuf has a SolarSmart range and Laserlite have a 3000 range. These types of sheets help to skew the amount of light available without letting as much heat through. They are able to reflect more of the heat.
Can I cut polycarbonate sheet with scissors?
While you can cut a polycarbonate sheet with the help of scissors and jigsaw, but a circular saw is the best tool you can use, especially when cutting larger lengths of polycarbonates. Such a combination will result in a very nice smooth cut.
What is the best plastic roofing?
Polycarbonate is a very strong and resilient thermoplastic material. Polycarbonate is also very lightweight and capable of withstanding extreme temperatures, either hot or cold. Due to these qualities it makes for an effective roofing material for many applications.
How do I cut the laserlite sheet?
How do I cut the Laserlite sheet? Cut with shears, a fine toothed hand saw or circular saw with a cut off blade suitable for plastics. What is the minimum side lap for corrugated, greca and 5-Rib profiles? 1 ½ corrugation for corrugated, and 1 corrugation for greca and 5-Rib.
Which side of the laserlite sheet has the co-extruded cap layer?
Only one side of the sheet has the co-extruded cap layer to protect against the sun’s harmful rays. How do I cut the Laserlite sheet? Cut with shears, a fine toothed hand saw or circular saw with a cut off blade suitable for plastics.
How to cut polycarbonate sheets?
You need to hold the polycarbonate sheet firmly down on a flat surface so that it doesn’t move while cutting. Keep the right pressure on the knife or scissor and cut it smoothly.
What is the strength of laserlite?
Its strength in fact is more than 250 times stronger than glass, this in combination with its ability to block out harmful UV rays (99.9%) make it an ideal choice wherever a safe and lightweight roofing material is required. What are the current profiles in the Laserlite® polycarbonate corrugated sheet (PCCS) range?