How long does TWP stain need to dry before rain?
approximately 4-12 hours
In most situations, TWP will take approximately 4-12 hours to dry but it will take longer to fully cure. Check the forecast and confirm that rain is not expected for at least a day or two. Once the conditions are right and the wood is completely dry you can begin staining.
How long before you can walk on Twp stain?
Allow to dry for a minimum of 48 hours. Though this system is designed for non-traffic surfaces, it can be thinned with 25% Mineral Spirits for traffic areas. Walking on TWP® before it is dry will cause tracking. DRY TIME: TWP® is a semi-drying finish designed for penetration.
How much Twp stain do I need?
The specified coverage rate for TWP is 150-200 square feet per gallon for the first coat. Second will apply at 200-300 per gallon. This averages to about 100-125 sq. feet per gallon for 2 coats wet on wet..
What does Twp mean on deck stain?
TWP® stands for “Total Wood Preservative” and has been manufactured by Gemini Coatings for over 20 years. TWP® Exterior Wood and Deck Stain is registered as an EPA Wood Preservative and is manufactured using only the highest quality of raw materials.
Can you use Twp stain on wood?
TWP® Exterior Wood and Deck Stain is registered as an EPA Wood Preservative and is manufactured using only the highest quality of raw materials. Offering Superior Protection from UV discoloration, rotting, and water, TWP® Wood Care, and Deck Stain can be used on virtually any exterior wood surface.
What is the best stain to use for decking?
TWP is one of the top-rated semi-transparent stains on the market today. The only exterior wood and decking stain that is EPA approved as a wood preservative. Use TWP and you are using the highest grade oil-based stains available for the 2019 season!
What is the highest grade stain available for 2021?
Use TWP 100 Series, TWP 1500 Series, and the TWP 200 Series and you are using the highest grade oil-based stains available for the 2021 season! If you have any questions on TWP, see our Q&A section below each product or visit TWPStainHelp.com. TWP Semi-Solids are now available in 30 Custom Colors!