How much does it cost to build a wall of bookshelves?
The cost to have built-in bookshelves installed averages $2,729 or between $1,295 and $4,205 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour. For high end custom work, expect to spend $150 to $1,200 per linear foot.
Are built ins good for resale?
If resale value is important to you, then you’ll be excited to hear that, for the most part, built-ins can increase the value of a home as long as they provide more function to the space.
Is it cheaper to make or buy a bookshelf?
If you build with real wood, your furniture is going to be more sturdy and will last longer. So when you go to replace that cheap bookcase you bought in a year, just remember that it’s now costing more to replace than it would’ve cost to DIY in the first place. Each one of those bookcases cost me about $100.
How thick should bookshelves be?
Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.
How to build a built-in Bookshelf?
Determine the measurements for the shelves,and mark them on the plywood with a straightedge.
How much do built in bookshelves cost?
On average, depending on the cost factors mentioned below, the professional installation of a built-in bookcase is going to cost anywhere from $2,500 to as much as $8,000+ or about $150 to $375 per linear foot, sometimes even much more, again, depending on the factors involved.
How to build a bookcase?
First,choose a location for your bookcase and determine the size that best fits your needs.
How to build a simple shelf?
1) Find some bricks and shelf boards. The shelf boards should all be the same length; if not, cut them to the same length. 2) Choose a suitable place for the shelf. Since the shelf has little support, it needs to be flush against a wall, or have some sort of similar flat backing. 3) Place two bricks together on the floor space selected. Place another two bricks together on the opposite side to form the base of the shelving. 4) Create the shelving. You’ll place the first shelf board onto the base bricks. 5) Add the next shelf board. The shelf has been made. It’s simple but it’s adequate for keeping things like books, DVDs and CDs in order.