Can you cut hay with a disc mower?
Disc mowers handle thick and lodged hay with ease. High cutting speeds. This is a time-saving feature when mowing several small fields.
How fast can you cut hay with a disc mower?
Disc mowers handle thick and lodged hay with ease. High cutting speeds. If you have the horsepower, there is almost no limit to how fast you can drive through the field. Speeds of up to 15 mph or more are feasible, though very few tractors can do this safely.
How many horsepower does it take to run a disc mower?
A new 9 ft cut disc mower/conditioner with rubber rolls from NH calls for 65 HP. But if you move up to the 10 foot cut NH, minimum HP is 80. Keep in mind that these ratings are for ideal conditions (flat land, uniform crop, etc.) and running at pretty high ground speeds.
Which is better drum or disc mower?
Drum mowers are easily the most rugged of the hay mower types. A drum mower can be run at even higher speeds than a disc mower, and double the speed of a sickle bar. Low power consumption.
Can you use rotary cutter for hay?
And whether you market that hay off the farm or feed it to your own livestock, that’s a direct, bottom-line benefit. …
What RPM should I run my disc mower?
Set the rpms around 1800 engine and powershift to where it’s comfortable. If a field is too rough to go over 7 it’s time to rotate and rework before going back into hay.
How much horsepower does a Discbine need?
In New Hollands case both the ten ft discbines call for 80 hp minimum. When mowing thick down mangled hay the flails will grab the hay before its cut also sometimes.
How much horsepower does it take to run a 7 foot disc mower?
on krones sight they recommend a 41 pto horsepower for the 7 foot 11 in mower. the 9 ft requires 55 minimum .
Can you top with a drum mower?
There shouldn’t be any issues using a drum mower for topping. with the simple types you will need to extend the top-link to rock the mower back, this will raise the cutting height.
What is the difference between a reel mower and a rotary mower?
A Reel mower snips the grass, cutting each blade like a pair of scissors. It’s a precise, clean cut that makes for a healthier and more attractive lawn. A Rotary Mower is a mower in which the blade spins horizontally (east to west) and uses a sucking and tearing action to cut the blades of grass.
What is a disc mower used for?
Mower-conditioners are defined by the mechanisms that accomplish mowing and conditioning. There are three types of mowers: sickle bar mowers, disc mowers, and drum mowers. Sickle bar mowers use a reciprocating blade to cut the grass and typically use a reel to fold the grass over the knife.
How big a disc mower?
These disc mowers use 5, 6, or 7 discs , depending on model, and offer cutting widths ranging from 6-feet, 6-inches (2 m) to 9-feet, 2-inches (2.8 m). They’re perfect for use with the John Deere 5100E ( US CA) we’re using in this video. These disc mowers offer several features worth noting.
What size disc mower?
A disc mower’s size is defined by the number of discs that are assembled to the cutter bar. This could be five-to-eight discs. A five-disc unit has a cutting width of about 7 ft., and the eight-disc unit almost 11 ft. Randy Webb is a product marketing manager with an implement company.
Who makes Kubota disc mowers?
Vicon became part of Kneverland a few years back, who got bought by Kubota. Seems to me a few other companies got rolled into that brand too, Kubota should have a wide range of stuff they could brand as orange.