What is A234 WPB mean?
ASTM A234 WPB Pipe Fittings means that the pipe fitting with ASTM A234 WPB material and is used for the system of pressure piping of high or moderate temperature services. ASTM A234 is standard of the pipe fitting material. WPB is a steel grade in which W stands for weldable, B is grading B and P stands for pressure.
What is A234 steel?
ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services. It covers steel fittings of seamless and welded types. Steel Pipe fittings are applied in pressure pipelines and in pressure vessel fabrications.
What is WPL6 material?
A 420 WPL6 FITTINGS is the most popular grades of butt welding pipe fitting whose material is ASTM A420 grade WPl6. It is the standard specification of wrought carbon steel and alloy steel for low-temperature service and it is suitable for cold weather, winter or deep sea water projects.
What is ASTM A 106?
ASTM A106 seamless pressure pipe (also known as ASME SA106 pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gases that exhibit higher temperatures and pressure levels.
What grade is WPL6?
WPL6 Means ASTM A420 Grade WPL6 is related to ASTM 420 WPL6 for pipe fittings manufactured by Wrought Carbon Steel. WPL6 Grade may be a normalized grade of carbon steel that has been Charpy Affect tried at -50°F (-45°C) with 13 ft-lb (normal of three examples) 10 ft-lb (person example) least.
What does WPL6 stand for?
What does ASTM A420 Gr WPL6 Means? WPL6 Means that the Butt-weld Pipe Fittings whose Material is ASTM A420 Gr WPL6 is a standard specification for piping fittings of wrought carbon steel for Low Temperature Services. Due to which the LTCS A420 Gr WPL6 Fittings are specially utilized in low temperature conditions.
What is WP11 material?
Manufacturer of Elbow A234 WP11 Cl2 and Cl1 Fittings, Refer weight chart of ASTM A234 Gr. WP11 Cl. 1 Fittings. A234 WP11 Material is a wrought pressure grade material that is used for various welding applications. ASTM A234 Grade WP11 is made from carbon, manganese, phosphorus, sulfur, silicon, chromium and molybdenum.
What are ASTM A234 fittings?
ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.
What is astastm A234 A234 M07?
ASTM A234/A234M-07. Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service. This standard covers wrought carbon steel fittings of seamless and welded construction which are manufactured to the dimensional specifications of ASME B16.9 and B16.28.
What is the formula for A234 WPB pipe fittings?
The sum of Cr and Mo shall not exceed 0.32%. The maximum carbon equivalent (C.E.) shall be 0.50, based on heat analysis and the formula C.E.=C+Mn/6+ (Cr+Mo+V)/5+ (Ni+Cu)/15. What is the manufacturing process of ASTM A234 WPB pipe fittings? The WPB is not short hand for any process. It is simply an identifier developed by ASTM.
What is the maximum carbon equivalent (CE) of ASTM A234?
The maximum carbon equivalent (C.E.) shall be 0.50, based on heat analysis and the formula C.E.=C+Mn/6+ (Cr+Mo+V)/5+ (Ni+Cu)/15. Mechanical properties of ASTM A234 Where the wall thickness lies between two values above, the min elongation value is determined by the following equations: Longitudinal E=48t+15.00 Transverse E=32t+10.00