How do you calibrate a Dexis sensor?
Verify the serial number in the calibration files matches the Dexis Platinum sensor you have in for repair. With your mouse: click, drag, and highlight all three of the Dexis Platinum calibration files. Open a new email in your email program. Click and drag the Dexis Platinum calibration files over to your new email.
How do I change my tooth number on Dexis?
On the enlarged image, click on the current tooth number. Click ‘off’ the highlighted tooth and click ‘on’ the correct tooth. Click Done. Re-number an X-ray Enhance X-ray Images To adjust brightness and contrast, click and drag on the image.
How much does Dexis imaging software cost?
The Apex Dental Sensor Compared to the Dexis Dental Sensor
Apex Dental Sensor | Dexis Dental Sensor | |
---|---|---|
Replacement Cost | $2,747 | $3,500 |
Imaging Software | Apteryx XrayVision | Dexis Imaging |
Annual Support | (1) Year Support Included – $400/Year After 1st Year | Included in DexCare |
Training | Included in Support Plan | Included in DexCare |
How do I import an image into Dexis?
Select desired images by checking their boxes, click on Export Images. Open the correct patient screen and click on the Import icon. Browse for the folder on the Desktop. Click on the images, click on Import Selected, click Done.
How do I export an image from Dexis?
To export an x-ray image from Dexis, go into the Dexis window where you usually view the x-rays. Look for the export button (third from the right on the left side of the upper toolbar, see below). If you hover the mouse over it, it will tell you that it’s the export button. CLICK the export button.
How many xrays are in an FMX?
18-20 x-rays
An FMX is a series of 18-20 x-rays, which includes all 4 bitewings and PA’s of every tooth. It allows a comprehensive look at every tooth, and is especially useful if there are multiple teeth with problems to diagnose.
Who wrote the DEXIS imaging suite Quick Reference Guide?
Title DEXIS Imaging Suite Quick Reference Guide Author DEXIS, LLC Created Date 10/19/2011 6:05:11 AM
What is the DEXIS software?
We hope you will have an extraordinary experience with our products and services. Indications for Use The DEXIS Software is a software program for general dental and maxilla- facial diagnostic imaging. It controls capture, display, enhancement and saving of X-ray digital images from digital imaging systems.
How do I enter patient data in the DEXIS application?
1. Open the DEXIS icon to launch the DEXIS application to display the DEXIS Administration window. 2. Select a patient or enter new patient data. Refer to the DEXIS manual for instructions. 3. On DEXIS Administration window, click one of the DEXray icons. 1 Capture_Manual.book Page 3 Thursday, December 8, 2016 1:49 PM Chapter 2 4 4.
How do I take an X-ray with a DEXIS classic?
Take an X-ray On the DEXray screen, click on the X-ray icon, click on a tooth number, and wait for green bars. When green bars appear, place the sensor and trigger the X-ray tube. Image Appears with a Honeycomb Pattern Note: Applies to DEXIS Classic sensor only. 1. From the DEXray screen, click on the X-ray icon. If your sensor’s number is not