How do I connect my Naza M V2 to my computer?
Plug your Naza flight controller into the computer via the LED, supply power from a battery and open device manager. You should see your device listed under ports as “USB Serial Device (COM##)”. Right click that device and click properties, then under the Drivers Tab click Update Driver.
What is DJI Naza?
The Naza-M V2 is a powerful flight controller for enthusiast, commercial and industrial flyers. It’s easy to install, simple to configure and above all, extremely stable. Nine types of traditional motor mixes are supported, making it ideal for every setup.
How do I connect my phantom 1 to my computer?
Connect your Phantom USB to your computer – open the battery compartment of your Phantom (no battery installed) and locate the USB cable inside – pull it out and connect it to your computer.
What is DJI Naza M lite?
For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight control system. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control.
What is the DJI Assistant 2?
The DJI Assistant 2 software contains extra settings and utilities for all DJI equipment such as drones, gimbals and cameras. With the DJI Assistant 2 Mavic, you have options to upload flight data, black box information, calibrate your vision sensors and upgrade your firmware.
What app do I use for DJI Phantom 1?
Capture and share beautiful content using the DJI GO app with the Mavic, Phantom series*, Inspire series and Osmo series.
How do I connect my DJI Phantom to my phone?
You can connect your DJI drone to your phone by using the compatible DJI flight control app, which can be downloaded on Android and iOS devices. Open the app and follow the steps on the screen to connect the phone to your drone’s own Wi-Fi connection and then complete the setup.
How to setup DJI FPV system?
How to Setup DJI FPV System (Air Unit, Goggles, Remote and Betaflight) 1 Pairing FPV Goggles and Air Unit. In order to get image on your goggles from the camera, you have to first pair/link your DJI FPV goggles with the Air Unit. 2 Using DJI Remote Controller. 3 Betaflight OSD Setup. 4 Video Feed Quality.
How to use betaflight OSD in DJI FPV goggles?
Finally, in your DJI FPV goggles, turn on Custom OSD under Settings, Display. Now you can select the elements you want to display in the Betaflight OSD tab. Not all the elements are supported yet, but DJI has been making some progress to support full Betaflight OSD.
How to upgrade the firmware of Naza assistant?
* Download the Firmware via Assistant software; the software only supports Windows XP or above (32bit/64bit). Use the Input function in the “Tools” of the Assistant Software to input the “PHANTOM Default Configuration Parameters”. 1. You can upgrade the newest Naza Firmware via above Naza Assistant software we provided.
How do I power the DJI air unit?
The DJI Air Unit takes 7.4V to 17.6V voltage, you can power it directly from a 3S or 4S LiPo battery. However, I’d recommend powering it from an external voltage regulator , or a BEC on the FC. That’s because voltage spikes from motors and ESC could damage the Air Unit (same way it could damage your analogue VTX).