What is a coal basket fireplace?
Gas coal baskets and gas coal burners are the smaller version of gas logs and fit very small fireplaces where gas logs cannot fit such as the tiny coal fireplaces in old homes. This is a vented gas product. It MUST be installed into a functioning wood burning fireplace with a lined chimney.
Can a vent free gas fireplace be vented?
Answer: Unfortunately, there is no way to convert a ventless fireplace into a vented fireplace. Ventless fireplaces are not designed to have a vent added to them. Your only alternative is to tear out the existing ventless fireplace and replace it with a vented fireplace.
How much does it cost to convert a coal fireplace to gas?
The average cost to convert a fireplace to gas is $3,000, with a typical range of $500 to $5,500, depending on a range of elements, including whether you choose a vented gas insert, vented gas log, or ventless gas log.
Can you restore an old fireplace?
Old-house fireplaces that have been decommissioned can be brought back to good working order with some thoughtful repairs. The restored fireplace, with a new insert and two cast-in-place flue liners in the chimney, now safely vents two appliances—hot water heater and boiler—in addition to holding a crackling fire.
Can I burn coal in my fireplace?
To use coal safely, you need to provide oxygen to the fireplace. Have a small opening at the front of the fireplace so the coal will burn effectively. If not provided with sufficient oxygen, the carbon monoxide produced by burning coal starts to accumulate, escaping in the home instead of the chimney.
How do I know if my fireplace is burning coal?
A coal fireplace is a very small masonry fireplace, most often found in homes built between 1880 and 1930. A coal fireplace is small – typically around 20″ wide or less, and smaller than 12″ deep. They are generally taller than they are wide, exactly opposite of how fireplaces are built today.
Why do I need a fireplace grate?
As the fire in the fireplace becomes hotter we can warm our house with less fuel. This means that in the long run, a fireplace grate will save you money. Secondly, as wood is burned in a fire grate, hot coals fall to the fireplace floor. This allows the fire to burn from the bottom up, more completely burning the fuel.
What’s the purpose of a fireplace grate?
The purpose of a fireplace grate is to: Help raise the main body of an open fire off the floor of the fireplace. Help protect the hearth from the intense temperatures of a fire. Provide a fire with the ability to receive a source of air from below.
Do you need a fireplace grate?
The best fires burn when air can circulate under the logs. To achieve this, you’ll need a metal fireplace grate to hold your wood, or a set of andirons. Metal grates tend toward the more practical, while andirons perform the same function with a decorative flare.
What is a natural gas fireplace?
Natural Gas Fireplaces. These natural gas fireplaces include some of the most cutting-edge fireplace technology, too. They feature remote controls, night lights, and alluring LED light beds. You’ll find traditional one-sided but also the thoroughly modern see-thru varieties as well. And you’re sure to find something for every decorative taste.